Showing the actual dBm on your phone. Field Test Mode

iPhone Field Test Mode
Accessing Field Test Mode on the iPhone is relatively simple, just open the Phone app, switch to the keypad and dial the following code: *3001#12345#* and then press call. If you dialed it correctly, your iPhone will enter Field Test Mode and you’ll see the numerical value for signal strength in the upper left hand corner of the screen where the signal strength was previously displayed in bars. To exit and return your iPhone to normal status, all you need to do is hit the Home button. The mode is available on any iPhone running iOS 4.1 and all later versions.
If you want your iPhone to always display numerical signal strength instead of signal bars, you can perform the following process. Once in Field-test mode (accessed by entering and dialing the code above), hold down the power button until you see “Slide to Power Off”, then release it. Then hold the Home button until you’re returned to your main app screen. You’ll now see your numerical signal strength while you use your phone, and you’ll be able to tap the signal numbers to switch to signal bars, and vice versa. To exit this permanent field-test mode, simply reboot the phone or re-load Field Test Mode and exit it via the Home button.

Android Field Test Mode
Accessing Field test mode on Android phones is also straightforward. You simply need to find your way to “Settings” > “About Phone”, and your numerical signal strength will be available under either Network or Status, depending on the model of the phone you own.

All other phones list.

Last Update: 02.12.2020  

02.12.2020  Camera Information

Join our email list

  • This field is for validation purposes and should be left unchanged.