Log in or create a new account with a new user ID, email address and password, then choose the “Cameras” menu to “Activate Data Plan”. Choose “AT&T” as the wireless data provider. Choose either M.I.N.E.™ or I.C.E.™ as the camera type. Use the picture to help identify the correct type; OD green for a M.I.N.E.™ camera and camouflage for an I.C.E.™ camera. Enter the 15 digit IMEI number. The number can be found on the inside wall of your camera or under your camera settings by looking under MENU → SYSTEM → INFORMATION (scroll down seven topics onto the second page). For AT&aT activation, we have provided or sent you a new SIM card for activation. Input the 20 digit ICCID number. You will not be able to transfer a used SIM card. You must use the SIM card that came with your camera or was sent to you from JAGER PRO. Check the box to register your camera warranty then “Add Subscription to Cart”. Ensure your camera is displayed in the Shopping Cart. You may add additional subscriptions before proceeding to checkout.
Fill out your billing information and double check your order. Fill out the credit card information, then read the terms and conditions. Check the box then proceed to checkout. You will receive a confirmation email for your order. JAGER PRO will assign your ICCID number a phone number and add your IMEI number to the server, then send you an email after the new phone number has been activated on the AT&T network. This process can take from 10 minutes up to 24 hours.
While waiting for the AT&T activation process to complete, download and become familiar with the Operations Manual and watch the Operations Video . Hover over “Cameras” and click on “Manuals and Videos”. Select “AT&T Cameras (3G)” then choose the “Operations Manual” tab to “View and Print.pdf”. Watch the camera “Operations Video” then set up your camera to the appropriate settings following the “Operations Manual” instructions. You will not be able to conduct any connectivity tests until after your camera is registered to the network and you receive the confirmation email from JAGER PRO.
Step 3 – Create an Account on jagerprowireless.com
Input the “Camera Description” by giving your camera a name. This is very important if you are using multiple cameras in the field. Input the “Module ID (MEID/IMEI)” number off your camera and phone number from the email. Watch the jagerprowireless.com video located to the right of these inputs to “Locate your Module ID” and “Register your Camera” to receive the registration code.
After adding your camera, the website will take you to the camera management page. Ensure you send a test photo. Press “MENU” until you are at the live preview screen with your carrier at the top. Press “OK” to take a photo and “OK” again to send the photo. Once the photo is sent, turn your camera “ON” to complete the syncing process. Check the box where it says “Select (camera name)” then click “GO” next to “Request Status”. A new photo should appear with the code “JAGER PRO E” at the bottom of the photo.
Click on the delivery options button. Choose which camera you want to update then check the box for each email address or phone number to send to. The last option is “Other Delivery Options”. Enter the email address or phone number you want to receive the daily status report, you can only insert one recipient here. Ensure the appropriate gateway suffix is added to the recipient phone number. Once complete, click on the “Update” button.
Click on the “Change Settings” button. Choose which camera you want to update and click select. Below it will show the “Active Camera” with its name. As you scroll down you will see “Just Save My Changes”, “Update Camera Settings” and “Retrieve Camera Settings” with additional information below. For now, click on “Retrieve Camera Settings”.
Wave your hand in front of the camera so it will take a motion activated photo. Click on “Camera Management”. We are waiting for the camera to send the motion activated photo and to retrieve camera settings. Wait 30 seconds then click on “Refresh”. The new photo will have an “M” at the bottom of the picture.
Select (your camera) by checking the box. Use the drop down box and select “Take a Photo”, then click “GO”. This will tell the camera to take a photo. Wait 30 seconds then click on refresh. The new photo will have an “S” at the bottom of the picture.
The next step will be to set up your phone with the jagerprowireless app. Hover over “My Cameras” and click on “Mobile Access”. The top menu will have “Your Account ID”. Below is the camera name “Description” with 2 columns, “Admin Access Code” and “Guest Access Code”. Type in an Admin Access Code for your device. If you want someone else to view photos but not have control of the camera, set up a “Guest Access Code” for them. You can give all your cameras the same access code or use a separate access code for each camera in case you have to delete one at a later time or to give someone access to only one camera.